Elta Slim High Temperature Centrifugal Box Fan

"Slim Qube SSQUHT
High Temperature Centrifugal Box Fan

A multi-discharge, double skinned fan unit incorporating a high performance backward curved impeller. With the motor situated out of the airstream, it is suitable for more arduous and elevated temperature applications.

● 6 standard sizes from 315mm to 710mm
● Air volume flow rates up to 5.216 m3/s
● Static pressures of up to 1390 Pa
● Suitable for operating temperatures of up to +120°C (in duct)
● Inverter speed controllable via 1Ph and 3Ph supply
● Available in AC

Features and Benefits:

High Temperature
Motors are out of the air stream and are not effected by contaminates in the ventilated air. The range is suitable for various applications, from contaminated air to elevated temperatures up to 120°C.

Intelligent Design
Movable panels allow the outlet position to be altered on site to suit installation.

Low Noise
Units are constructed from double insulated panels filled with 25mm fibre glass acoustic insulation giving reduced noise levels.

Easy Maintenance
An easily removable motor/impeller assembly arrangement is ideal for frequent cleaning or maintenance.

Weather Resistance
Motor cover is available as an accessory to allow external mounting.

Controllability
The Elta Drive range of inverters has been designed encompassing the latest technology and combining robustness with reliability. Using an inverter to control fans via sensors to reduce fan speed can provide significant cost-savings through lower energy consumption.

Warranty
Each SSQU has a 12 month warranty.

Specification:

Casing
Constructed from self-supporting corrosion-resistant extruded Aluminium section, assembled with aluminium corners and 25mm thick double skinned removable panels, manufactured from pre-galvanised steel, in-filled with a non-flammable mineral wool, 60kg/m3, thereby minimising breakout noise.

Motors
Three phase multi-voltage IP55 TEFC Foot / Flange mounted IEC frame motors, wound for either (Delta) 230V/3Ph/50Hz or (Star) at 400V/3Ph/50Hz connection, suitable for speed control when used with the Eltadrive VSD range of frequency inverter controls.

Impellers
A high efficiency backward curved welded steel impeller with a non-overloading power characteristic, suitable for continuous S1 operation up to +120°C, finished with a powder coating to RAL 5002 for greater surface protection, and dynamically balanced to G2.5 / G6.3 according to ISO1940 part 1.

Control
Speed control shall be via Eltadrive VSD Eltadrive VSD IP20 or Switched IP66 shall provide precise motor control and energy savings. The Eltadrive range of inverters have been designed encompassing the latest technology and combining robustness with reliability. Using an inverter to control fans via sensors to reduce fan speed can provide significant cost-savings through lower energy consumption.

Quality Management
Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001: 2008. All Slim QUBe SSQU-HT units are to be tested to ISO 5801 (airside performance) and BS 848 Part 2 (sound performance).

"